A little overweight, in my opinion. Why not put the ammeter in the headlight shell and the ignition switch elsewhere on the bike? The speedo on a nice small bracket and done. Or, if you want to, you could put a rev counter there.
Gruß,
Andreas
caferacer-forum.de - Das Forum für Petrolheads, Garagenschrauber, Ölfinger, Frickelracer und Alteisentreiber
Royal Enfield» Sixty 5- Cafe Racer
Forumsregeln
Bitte beachte folgende Punkte, wenn Du Dein Projekt bei uns vorstellen möchtest.
Vielen Dank.
Bitte beachte folgende Punkte, wenn Du Dein Projekt bei uns vorstellen möchtest.
- Bitte wähle die Kategorie mit Bedacht.
Solltest Du Dir nicht sicher sein, dann prüfe anhand der Stilbeschreibungen unter der entsprechen Kategorie, welchem Stil Dein Motorrad am ehesten entspricht oder kontaktiere einen Moderator/Administrator. - Gestalte Dein Thema interessant und mit Bildern. Interessante Themen finden mehr Beachtung und Du bekommst umfangreicheres Feedback.
- Bitte halte Dein Thema aktuell und poste hin und wieder den aktuellen Fortschritt oder einfach nur neue Bilder.
Vielen Dank.
- grumbern
- Administrator
- Beiträge: 16220
- Registriert: 18. Jan 2013
- Motorrad:: Kreidler Mustang (1981, original), Kreidler RS (1974, Café), Kreidler Florett 80 (1982, original), Enfield Bullet 350 (1979, original), XS-650 (1977, Café), Royal Enfield Indian Chief 700 (1959), Royal Enfield Trial (1963, im Aufbau), Royal Enfield Interceptor (1964, im Aufbau)
- Wohnort: Spessart
- f104wart
- ehem. Moderator
- Beiträge: 19074
- Registriert: 1. Apr 2013
- Motorrad:: CX 500C (PC01), CX 650E "L´abono carrera" im Umbau, CX 500 EML
- Wohnort: 35315 Homberg Ohm
Re: Sixty 5- Cafe Racer
Andreas was a little bit faster. My opinion is the same. It´s too massy.
...The ignition Switch I woul put below the tank.
What is the high of the speedometer? I Think, it´s not more then 25 - 30mm. May be you´ll get inspiration with these pictures.
...The ignition Switch I woul put below the tank.
What is the high of the speedometer? I Think, it´s not more then 25 - 30mm. May be you´ll get inspiration with these pictures.
- sven1
- Beiträge: 10617
- Registriert: 25. Jan 2015
- Motorrad:: BMW R 65 Bj. 6/81 Typ 248
ex(Simson Spatz Bj. 1970)
Suzuki GS550D Bj. 1978 (CR im Aufbau)
Suzuki GS 550 Katana (im Wiederaufbau)
Suzuki GS 550 L Bj. 1981 (Roadster im Aufbau)
Matchless G3LS Bj. 1952 (fragmentiert) - Wohnort: ...wo die Bäume höher als die Häuser sind...
Re: Sixty 5- Cafe Racer
Moin,
it looks very good, only the screw that hold the ignition lock doesn`t match with the rest.
Grüße
Sven
it looks very good, only the screw that hold the ignition lock doesn`t match with the rest.
Grüße
Sven
...Leben ist das, was passiert, nachdem du einen Plan gemacht hast...
BMW https://www.caferacer-forum.de/viewtopic.php?t=8647
Suzi CR https://www.caferacer-forum.de/viewtopic.php?t=17538
Suzi Roadster https://www.caferacer-forum.de/viewtopic.php?t=25427
BMW https://www.caferacer-forum.de/viewtopic.php?t=8647
Suzi CR https://www.caferacer-forum.de/viewtopic.php?t=17538
Suzi Roadster https://www.caferacer-forum.de/viewtopic.php?t=25427
Re: Sixty 5- Cafe Racer
I wanted to put a tachometer there, But I could not find a rev counter for one cylinder engine
The screw is old, I will polish it and add a black pad, the diameter of the ammeter disc
andy
The screw is old, I will polish it and add a black pad, the diameter of the ammeter disc
andy
- sven1
- Beiträge: 10617
- Registriert: 25. Jan 2015
- Motorrad:: BMW R 65 Bj. 6/81 Typ 248
ex(Simson Spatz Bj. 1970)
Suzuki GS550D Bj. 1978 (CR im Aufbau)
Suzuki GS 550 Katana (im Wiederaufbau)
Suzuki GS 550 L Bj. 1981 (Roadster im Aufbau)
Matchless G3LS Bj. 1952 (fragmentiert) - Wohnort: ...wo die Bäume höher als die Häuser sind...
Re: Sixty 5- Cafe Racer
...Leben ist das, was passiert, nachdem du einen Plan gemacht hast...
BMW https://www.caferacer-forum.de/viewtopic.php?t=8647
Suzi CR https://www.caferacer-forum.de/viewtopic.php?t=17538
Suzi Roadster https://www.caferacer-forum.de/viewtopic.php?t=25427
BMW https://www.caferacer-forum.de/viewtopic.php?t=8647
Suzi CR https://www.caferacer-forum.de/viewtopic.php?t=17538
Suzi Roadster https://www.caferacer-forum.de/viewtopic.php?t=25427
Re: Sixty 5- Cafe Racer
Moin
Thank you, but I will make a lighter version of the bracket.
andy
[attachment=0]ROYAL półka, budziki.JPG[/attachment]
Thank you, but I will make a lighter version of the bracket.
andy
[attachment=0]ROYAL półka, budziki.JPG[/attachment]
Du musst registriert und eingeloggt sein, um die Dateianhänge dieses Beitrags sehen zu können.
- grumbern
- Administrator
- Beiträge: 16220
- Registriert: 18. Jan 2013
- Motorrad:: Kreidler Mustang (1981, original), Kreidler RS (1974, Café), Kreidler Florett 80 (1982, original), Enfield Bullet 350 (1979, original), XS-650 (1977, Café), Royal Enfield Indian Chief 700 (1959), Royal Enfield Trial (1963, im Aufbau), Royal Enfield Interceptor (1964, im Aufbau)
- Wohnort: Spessart
Re: Sixty 5- Cafe Racer
Matching your speedo:
http://www.ebay.co.uk/itm/REPLICA-SMITH ... SwHptY-xiA
Fitting it to the Bullet may require a bit of work, but It can be done. An alternative would be an electronic one.
Gruß,
Andreas
http://www.ebay.co.uk/itm/REPLICA-SMITH ... SwHptY-xiA
Fitting it to the Bullet may require a bit of work, but It can be done. An alternative would be an electronic one.
Gruß,
Andreas
- f104wart
- ehem. Moderator
- Beiträge: 19074
- Registriert: 1. Apr 2013
- Motorrad:: CX 500C (PC01), CX 650E "L´abono carrera" im Umbau, CX 500 EML
- Wohnort: 35315 Homberg Ohm
Re: Sixty 5- Cafe Racer
@Sven: What do you want with such a modern instrument at this bike?
@Andreas:
...I would take the both Smith-Style instruments. For the housing I woul take a aluminium-tube with 1 or 1,5 mm wall-thickness.
For inspiration look here: https://www.caferacerkits.co.uk/shop/#! ... y=20704173
@Andreas:
...I would take the both Smith-Style instruments. For the housing I woul take a aluminium-tube with 1 or 1,5 mm wall-thickness.
For inspiration look here: https://www.caferacerkits.co.uk/shop/#! ... y=20704173
- grumbern
- Administrator
- Beiträge: 16220
- Registriert: 18. Jan 2013
- Motorrad:: Kreidler Mustang (1981, original), Kreidler RS (1974, Café), Kreidler Florett 80 (1982, original), Enfield Bullet 350 (1979, original), XS-650 (1977, Café), Royal Enfield Indian Chief 700 (1959), Royal Enfield Trial (1963, im Aufbau), Royal Enfield Interceptor (1964, im Aufbau)
- Wohnort: Spessart
Re: Sixty 5- Cafe Racer
If you take a close look at this Royal Enfield Fury 500 Cafe Racer, you can see how the fitting of the tacho is done on the Bullet engine:
Fury
You'd have to fit an angle drive to the right hand cover and connect it to the ignition shaft.
Gruß,
Andreas
Fury
You'd have to fit an angle drive to the right hand cover and connect it to the ignition shaft.
Gruß,
Andreas
Re: Royal Enfield» Sixty 5- Cafe Racer
Moin
I made a new speedometer casing.
andy
I made a new speedometer casing.
andy
Du musst registriert und eingeloggt sein, um die Dateianhänge dieses Beitrags sehen zu können.